Professional 4200PSI 4GPM 212CC Gas Pressure Washer, 10" Wheels 7HP Commercial Gas Power Washer with 3L Foam Bottle 5 Nozzles 33FT Hose for Home Car Fence Driveway (EPA/CARB/ETL Compliant)，77LBS

Product Features

• 【𝟒𝟐𝟎𝟎𝐏𝐒𝐈 𝐌𝐚𝐱𝐢𝐦𝐮𝐦 𝐖𝐚𝐭𝐞𝐫 𝐏𝐫𝐞𝐬𝐬𝐮𝐫𝐞 𝐃𝐞𝐬𝐢𝐠𝐧】: This gas pressure cleaner can reach a maximum water pressure of 4200PSI when the gasoline is fully burned and the garden hose is connected to normal water pressure and the quick-connect nozzle is 0°. It is suitable for cleaning most dirt and can easily solve various occasions that need daily cleaning, such as washing motorcycles, washing driveways, washing machine decks, washing fences, etc.
• 【𝐌𝐚𝐱𝐢𝐦𝐮𝐦 𝟒𝐆𝐏𝐌 𝐖𝐚𝐭𝐞𝐫 𝐅𝐥𝐨𝐰 & 𝟓 𝐐𝐮𝐢𝐜𝐤-𝐜𝐨𝐧𝐧𝐞𝐜𝐭 𝐍𝐨𝐳𝐳𝐥𝐞𝐬】: This gas power washer can achieve the maximum water flow area when using the maximum angle nozzle (the quick-connect nozzle angle is 40° or soap); the larger the quick-connect nozzle angle used, the greater the water flow. At the same time, we are also equipped with 0°, 15°, 25°, 40° and soap nozzles for you to use.
• 【𝟑𝟑𝐅𝐓 𝐇𝐢𝐠𝐡-𝐏𝐫𝐞𝐬𝐬𝐮𝐫𝐞 𝐇𝐨𝐬𝐞 & 𝟏𝟎-𝐢𝐧𝐜𝐡 𝐖𝐡𝐞𝐞𝐥𝐬】: This commercial pressure cleaner is equipped with a 33FT high-pressure hose and 10-inch wheels, which makes it easy for you to move and clean anywhere. It does not need to be connected to the wire for use, and the movable range is larger and the cleaning range is wider. Suitable for most cleaning activities, such as cleaning the ground, yard, driveway, chairs, fences, cars, moss, etc.
• 【𝐒𝐚𝐟𝐞𝐭𝐲 𝐋𝐨𝐜𝐤 𝐚𝐧𝐝 𝐒𝐚𝐟𝐞𝐭𝐲 𝐂𝐨𝐦𝐩𝐥𝐢𝐚𝐧𝐜𝐞】: The switch part of this power cleaner gas powered is equipped with safety lock. When not in use, the safety lock on the trigger can be lowered to avoid accidental triggering (do not point the gun barrel at people or animals when in use). At the same time, our cleaner meets strict environmental regulations and safety standards, and also meets EPA/CARB/ETL standards. It is safe for the environment and you can use it with confidence.
• 【𝐖𝐚𝐫𝐦 𝐏𝐫𝐞𝐜𝐚𝐮𝐭𝐢𝐨𝐧𝐬】: 1. When using it for the first time, make sure that the engine has been filled with gasoline to the standard oil level; 2. When connecting the quick-connect nozzle, pull the connector switch to the maximum value before installing or removing it to reduce wear. 3. After using the pressure cleaner, turn off the engine, pull the trigger to drain the water in the hose, and then store it.
• 【𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧 𝐒𝐭𝐞𝐩 𝐈𝐧𝐬𝐭𝐫𝐮𝐜𝐭𝐢𝐨𝐧𝐬】: 1. Install the machine and connect the nozzle and hose. 2. Pour gasoline and pull the trigger to exhaust the air in the gun barrel until a steady stream of water flows out. 3. Turn on the engine switch, open the fuel valve, and close the choke lever. 4. Pull the recoil rope to start the engine (if the first start fails, wait 2 minutes and try again; do not pull the recoil rope after the engine starts). 5. Open the choke lever.